Advanced Search

Journal Navigation

Journal Home

Subscriptions

Archive

Contact Us

Table of Contents

Click here to sign up for SAGE Journal Email Alerts today!

Sign In to gain access to subscriptions and/or personal tools.
High Performance Polymers
This Article
Right arrow Full Text (OnlineFirst PDF)
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Alert me to new issues of the journal
Right arrow Add to Saved Citations
Right arrow Download to citation manager
Right arrowRequest Permissions
Right arrow Request Reprints
Right arrow Add to My Marked Citations
Citing Articles
Right arrow Citing Articles via Scopus
Google Scholar
Right arrow Articles by Tagawa, M.
Right arrow Articles by Minton, T. K
Social Bookmarking
 Add to CiteULike   Add to Complore   Add to Connotea   Add to Del.icio.us   Add to Digg   Add to Reddit   Add to Technorati   Add to Twitter  
What's this?

Article

Effect of ultraviolet radiation from an oxygen plasma on the atomic oxygen-induced etching of fluorinated polymer

Masahito Tagawa Professor1*, Kumiko Yokota1, Kazuhiro Kishida1, Akio Okamoto2, Junichiro Ishizawa3, and Timothy K Minton4

1 Kobe University, Kobe, Japan
2 Technology Research Institute of Osaka Prefecture, Izumi, Japan
3 Japan Aerospace Exploration Agency, Tsukuba, Japan
4 Montana State University, Bozeman, Montana, USA

* To whom correspondence should be addressed. E-mail: tagawa{at}mech.kobe-u.ac.jp.


   Abstract

The contribution of extreme ultraviolet (EUV) and vacuum ultraviolet (VUV) from a laser-sustained plasma on mass loss phenomenon of fluorinated polymer in the ground-based laser-detonation atomic oxygen (AO) beam source was evaluated. The AO beam and EUV/VUV from an oxygen plasma were separated by a high-speed chopper wheel installed in the beam source. Mass changes of fluorinated polymer and polyimide were measured from the frequency shift of the quartz crystal microbalances during the beam exposures. It has been made clear that the fluorinated polymer is eroded by EUV/VUV exposure alone. In contrast, no erosion was detected for polyimide by EUV/VUV alone. The AO-induced erosion was measured for both materials even without EUV/VUV exposure. However, no strong synergistic effect was observed for the fluorinated polymer even under the simultaneous exposure condition of AO and EUV/VUV. Similar results were observed even in the simultaneous exposure condition of AO (without EUV/VUV from the laser plasma) and VUV from the 172 nm excimer lamp and D2 lamp. These experimental results suggest that the primary origin of the accelerated erosion of fluorinated polymer observed in the laser detonation AO source is not EUV/VUV from the laser-sustained plasma.

First published on July 30, 2009
High Performance Polymers 2009, doi:10.1177/0954008309335941


Add to CiteULike CiteULike   Add to Complore Complore   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us   Add to Digg Digg   Add to Reddit Reddit   Add to Technorati Technorati   Add to Twitter Twitter    What's this?